When an Argentina service center decides whether a torque tool may be used for a repair, it should review the instrument identity, calibration information, and specific job requirements together. A signed certificate alone does not show that the tool is currently in good condition or that it can meet every fastening task. The tool manager must know what the certificate demonstrates and who still needs to make a judgment.
Argentina's INTI (National Institute of Industrial Technology), at argentina.gob.ar/inti, covers metrology, quality and certification. This article uses it to highlight the need to review scope; it adopts no figures as workshop standards and certifies no service center or tool.
Start a Certificate Check with the Physical Tool
Match the tool identifier with the instrument information on the certificate and confirm that the model and identity agree. The name on the case, purchase order, or a photograph of another tool in the series cannot substitute for the tool actually being used.
Keep a complete scan of the certificate, rather than only the conclusion page. When the calibration item, direction, range, or result needs interpretation, ask the issuing body and competent technical personnel. Warehouse staff must not release a tool merely because the certificate looks acceptable.
Tool management records should also show inspection and maintenance status. A drop, abnormal use, or another concern after calibration requires a separate report; the original label must not continue to serve as proof that the tool was unaffected.
Process Requirements Determine Which Other Conditions Must Be Checked
The repair manager should determine the required tool and conditions from the applicable job information before deciding whether an existing instrument is suitable. This article provides no fastening torque, permissible error, or calibration interval.
| Check point | Information that must be connected | Who should handle it |
|---|---|---|
| Physical tool and certificate | Whether identity, model, and records match | Tool manager |
| Calibration scope and task | Whether the relevant scope and results support the intended use | Competent technical manager |
| Condition and use history | Drop, abnormal use, and maintenance records | Equipment or calibration service personnel |
| Job record and tool | Whether the instrument used this time can be traced | Operator and work-order administrator |
For a task requiring supporting attachments, also verify the manufacturer's application requirements. Do not add an extension or alter the method of use and then assume the original certificate covers the change.
Remove a Questionable Tool from the Ready-for-Use Area
If the identity does not match, the condition is abnormal, or the result cannot be interpreted, separate the tool from available instruments and mark the issue awaiting action. Do not return it to the tool cabinet after giving only a verbal warning to the next shift.
An appropriate person should decide whether inspection, maintenance, or recalibration is required. Buying a new tool may solve a quantity shortage, but a new purchase does not replace confirmation of intended use; applicable information and delivery condition must still be checked.
If the questionable tool has already been used on a job, retain the usage record and ask the repair manager to assess the impact. Any decision to recheck the relevant vehicles should be based on the specific circumstances. Do not automatically deem every job acceptable or require the customer to bear every cost.
Include Tool Readiness in the Model Service Plan
Before handling a new model, review existing tools against the expected tasks and identify the instruments and information that must be added. Do not list purchase quantities without assigning anyone to confirm when the tools are actually ready for use.
When consulting a vehicle supplier, use the Starvia export service overview to understand the communication scope and specifically request applicable service information for that version. A supplier's vehicle information does not qualify tools on behalf of the local repair facility.
At shift handover, make sure the incoming person can find the tool status and outstanding action records. Calibration documents, job references, and use histories should be stored separately but linked to one another so the workshop can explain why a repair was authorized to proceed.
FAQ
Can a tool with a calibration certificate be used for every fastening task?
No. A competent person must assess suitability by comparing the instrument identity, certificate contents, and specific job requirements.
Can a dropped tool remain in use while its label is still valid?
Report it first, remove it from ready-for-use status in accordance with management requirements, and have an appropriate person assess it. The label alone must not determine the decision.
Can one calibration interval cover every tool?
This article provides no interval. Determine it from manufacturer requirements, usage, and applicable management requirements.
How should earlier repairs be handled when an abnormality is found?
Keep records linking the tool to work orders and have the repair manager assess the impact and any subsequent checks. Do not reach a conclusion by guesswork.
When presenting model aftersales requirements through the Starvia contact page or WhatsApp, list the planned repair scope, ask for the corresponding technical information, and then have the local service center verify tool conditions.
References: INTI calibration service scope document and the Starvia export service overview. This article offers record management suggestions and does not constitute an interpretation of a calibration certificate or a repair technical specification. Information checked on 2026-09-04.