When procuring shared-passenger vehicles in Egypt, the port list should state where passengers sit, which devices they connect, and which tasks they intend to complete. Listing only the total socket count may leave customers discovering after delivery that cables cannot reach the rear row, phones can only charge, or an existing connection method no longer works.
Use the Starvia Automotive inquiry-preparation guide to organize vehicle use and attach device requirements to the inquiry. Port functions require verification on the actual version; infotainment menus and socket photographs alone cannot prove compatibility.
Record the Device's Real Task by Seat
Ask the customer to describe separately how the navigation phone, passenger phones, and onboard work devices will be used. Charging, reading media, and connecting to the infotainment system should each be stated. If one device performs several tasks, record each result separately.
Cable length and routing can be checked statically. Confirm whether a connected cable obstructs gear selection, seat movement, or passenger entry and exit and whether the device has a suitable resting place. Do not leave a device where it can easily slide simply to make a photograph look tidy.
The Volvo owner-support guidance on ports distinguishes device acceptance, power states, and placement precautions. It is an example from that brand and does not establish the same specifications for a candidate vehicle.
Replace Counting Circles on Socket Photographs with a Task Table
The procurement record should make the acceptance target clear to the supplier and allow it to state that a function is unsupported or still pending review. Do not describe every unverified item as supported.
| Passenger requirement | Documentation to request from the supplier | What the demonstrator record should preserve |
|---|---|---|
| Charge a rear-seat phone | Position and power description of the relevant port | Phone, cable, and actual seat |
| Connect a phone to infotainment | Connection method supported by this version | Functional interface after connection |
| Use several devices simultaneously | Use conditions stated in the manual | Actual state of each device |
| Continue use after leaving the vehicle | Power rules after shutdown and locking | Applicable boundary confirmed from the manual |
Demonstrate simultaneous use only under conditions permitted by the vehicle. Do not add an unverified splitter to create several usable ports temporarily and describe that result as factory equipment.
Carry Cable and Device Differences into Retesting
After interrupted charging or a failed connection, preserve the original combination. Once authorized, compare it with another suitable cable and record the change so repeated device swaps do not leave an untraceable result.
Obtain consent before testing a customer phone and limit the scope of data accessed. Afterward, remove pairings and personal data that need not be retained and do not place contact-list screenshots in vehicle sales materials.
If the customer's intended device is unavailable, a documentation review may proceed, but the order should state which test is missing. A supplier demonstration with a similar phone may be a reference but cannot replace confirmation of the specified device.
Return Port Accessories to the Delivery Checklist
If the demonstration uses an adapter, special cable, or phone holder, state separately whether it comes with the vehicle, who provides it, and its conditions of use. Quotation personnel must not assume that equipment borrowed from the dealer is a complimentary item.
At delivery, retest the agreed device combination and give the operating instructions to actual users. Recheck results after changes to software or options; earlier video represents only the version at the time of recording.
For a device that remains unconfirmed, procurement personnel may adjust the requirement or retain it as an unpromised item. Avoid sales descriptions such as compatibility with every phone or continuous high-speed charging when current documentation cannot verify them.
FAQ
Does a plug fitting the port mean it can connect to infotainment?
No. Check the corresponding port's data-function description and verify the connection task the customer needs.
If a rear port supplies power, must its location still be recorded?
Yes. Seat, cable, and device placement affect real access and should remain in the demonstration record.
What if the customer did not bring the phone?
Complete the documentation review first, state that the specified device remains untested, and agree on a later confirmation method.
If an adapter works during the demonstration, is it included with the vehicle?
Its inclusion must appear on the delivery checklist. A temporarily borrowed accessory does not automatically become a supply commitment.
When comparing shared-vehicle plans, submit device and seat requirements through the Starvia Automotive contact page, or discuss port documentation and vehicle demonstrations through WhatsApp.
References: Volvo owner guidance on ports and Starvia Automotive inquiry-preparation guide. This article provides procurement verification methods only and does not promise port capabilities for a specific model. Information checked on: 2026-09-04.