When a Peruvian customer plans a roof box or crossbars, list the complete installed envelope as requiring confirmation. The vehicle supplier provides original vehicle data, the installer confirms the accessory combination and installation state, and the site owner checks entry conditions. Purchasing brings these into one order record. An unsupported estimate from any party cannot directly establish garage access.
Hyundai's vehicle dimension information lists heights with and without roof rails separately, illustrating why dimensions must match equipment state. This article cites none of those values and does not use them to calculate dimensions for Starvia candidates.
List the Complete Combination in the Order
Ask whether the customer needs crossbars, a box or other equipment and whether it will normally remain fitted. Record brand, model and mounting method beside each item, leaving unselected parts pending. Roof rack included does not automatically include a box and every connector.
The vehicle supplier should describe original provisions, and the accessory provider should verify fitment to that version. Decorative components are not mounting points without evidence. Check interactions with opening roof parts as well. Do not schedule installation for combinations lacking adequate fitment information.
Select candidates from the Starvia new vehicle catalog, then request corresponding roof and accessory interface information. The catalog is a search starting point, not proof that an accessory is supplied or suitable for local use.
Attach Traceable Conditions to Measurements
After installation, have suitably capable personnel measure under appropriate conditions, recording vehicle and accessory identity and measurement method. Do not stand on unstable objects or climb onto the roof dangerously. The installer should arrange safe work.
| Recorded Item | State to Describe | Subsequent User of the Information |
|---|---|---|
| Original vehicle | Corresponding specification and original equipment | Installer checking document applicability |
| Installed combination | Crossbars, box and connectors | Purchasing checking actual delivery contents |
| Complete exterior envelope | Measurement positions, method and conditions | Site owner comparing access requirements |
| Removable accessories | States before and after removal | Driver identifying that day's vehicle condition |
Simply adding advertised vehicle height to accessory product dimensions may miss connection positions and mounting geometry. Calculations can identify questions, but final conclusions need reliable data or physical checks.
Interpret Height Signs Along the Actual Route
Customers should provide details of garages, car washes and loading sites they will enter. Record entrances, turns, slopes and overhead protrusions separately rather than relying on a photo of the entrance sign. Ask management to resolve discrepancies between signs and measurements first.
Stop if clearance is uncertain. Do not ask drivers to try and see whether contact occurs or loosen accessories temporarily to enter. Where removal is needed, appropriate personnel should use permitted methods and reconfirm the resulting vehicle state.
Consider space needed to open the box lid. Parking inside does not establish that the lid can open there normally. Users should know suitable loading and unloading positions to avoid overhead fixtures.
Send Change Information to the People Using the Vehicle
After acceptance, give drivers the current accessory combination and clearance restrictions. Replacing crossbars, adding a box or changing mounting position should trigger an update. Do not keep relying on the initial measurement indefinitely.
Height confirmation does not establish accessory load capacity or cargo restraint. For loading, check both vehicle and accessory requirements and have capable personnel confirm the complete arrangement. Garage access does not imply approved road use.
If daily use requires frequent removal and refitting to enter a fixed parking site, reconsider interior loading or another vehicle arrangement. Explaining this recurring burden before accessory purchase helps prevent a mismatch after handover.
FAQ
If the original height already includes roof rails, is another measurement needed?
First compare the documented equipment with the actual combination. Added crossbars or a box cannot simply use the original height. Check any differences further.
Can an accessory labeled universal be ordered immediately?
Obtain fitment evidence for the specific vehicle version and mounting method. Universal wording does not replace interface, structure and use-condition checks.
Can an empty roof box be ignored?
Its installed envelope cannot be ignored. Contents and occupied space are separate questions; record both according to actual condition.
Who should sign the garage access assessment?
Each party confirms the data and conditions within its responsibility, with purchasing organizing an evidence-based judgment. Do not ask a supplier unfamiliar with the site to promise access alone.
For roof equipment information, send the candidate version, proposed accessories and site questions through the Starvia contact page or WhatsApp, specifying the original vehicle details required.
References: Hyundai dimension information; Starvia Chinese-language new vehicle catalog. The dimensional example illustrates equipment-state relevance only and provides no installation or access authorization. Information checked on: 2026-09-04.