When Bolivian customers compare space beneath vehicles, they should request the load condition and measurement definition together. A photograph of an unloaded demonstrator on level ground does not prove that the same space remains after actual loading or that the vehicle can cross a particular rise or slope transition.
The official Tesla dimensions page distinguishes loaded and unloaded ground clearance and explains that accessories may change dimensions. It is cited only to show the importance of definitions; its figures do not apply to other vehicles.
First Ask What Condition the Quoted Dimension Represents
Ask the supplier for the dimension name, applicable configuration, load state, and documentary source. If only a figure or verbal description is provided, ask for the measurement location rather than assuming every point beneath the vehicle has the same clearance.
Tires, suspension, and factory accessories must correspond to the final vehicle. After replacement or addition of an underbody part during procurement, qualified personnel should confirm whether the original information remains applicable.
Use the guide to requesting photos and videos of specific vehicles to request clear documentation that preserves the vehicle identity and photography environment.
Use Photographs to Answer Questions About Location
Photographs help identify areas, accessories, and measurement references but should not be used to calculate dimensions from image proportions. Wide-angle distortion, camera height, and ground condition can all make visual comparisons difficult to interpret.
| Photographic material | Accompanying explanation | Judgment it can support |
|---|---|---|
| Vehicle side view | Configuration, ground, and load state | Identify overall stance and accessories |
| Visible underbody area | Camera position and safe inspection method | Locate areas requiring further confirmation |
| Measurement-record image | Measurement point, tool, and method | Compare against the original measurement result |
| Before-and-after accessory comparison | Part changes and measurement conditions | Identify whether the modification affects the original definition |
| Customer road photograph | Specific location and passage requirement | Formulate on-site assessment questions |
Do not ask customers to enter beneath a vehicle without safe support merely to obtain an image. Qualified personnel should handle measurement and inspection; the dealer manages only the documentation request and records.
Observe Loaded Conditions Using Real Task Preconditions
Before arranging a static observation, confirm actual occupants, cargo, and permitted load. If the customer verbally describes a "typical full load," verify it further rather than reaching a conclusion using an unknown weight.
When comparing vehicles, record the same task conditions where possible and describe them separately when consistency is impossible. Do not simply rank figures from different standards or states from high to low.
Ground clearance is only one part of a suitability assessment. Steering, suspension movement, and road shape require appropriate evaluation. A photograph cannot be extended into a promise of dynamic passage capability.
Retain Unverified Road Surfaces in the Procurement Recommendation
The report can state which dimensions have reliable documentation, which received only an observation, and which customer road sections remain unassessed. For a specific slope transition of concern, advise assessment by suitable personnel under safe and lawful arrangements.
If the documentation cannot answer a critical use question, defer the corresponding fitment conclusion. Do not fill the gap with "usually possible" or change tires or suspension independently merely to reach a target.
The final contract description should correspond to the delivered condition. Confirm warranty and local-inspection implications separately where modifications are involved. If the delivered vehicle differs from the documentation, recheck it before acceptance.
FAQ
Can a photograph of two vehicles together show which is more suitable for mountain roads?
It provides only visual clues. Dimensional definitions, loads, and actual-use assessments are still required.
What if the manual provides only an unloaded dimension?
Retain that definition explicitly and do not calculate a loaded figure. Ask the supplier for additional documentation.
Does the original dimension still apply after a guard is added?
The effect of the modification requires confirmation. Do not assume the original lowest point and dimension remain valid.
Can ground clearance be estimated from image proportions?
Image estimates should not serve as formal specifications. Reliable measurements require a method and original record.
When comparing clearance needs among candidate vehicles, provide load details and the areas of concern through the Starvia Automotive contact page or WhatsApp to discuss specific documentation needs.
Information checked on: 2026-09-04. This article cites no candidate-model ground-clearance figure and does not guarantee passage over a particular road surface; measurement and modification require professional and local compliance confirmation.